IE2600-25-GG

2-1/2″ Groove x Groove Factory Set Pressure Reducing Angle Valve

REQUEST MORE INFO
Add to Your Specifications List

Related Documents

   

INFORMATION
The Wilson and Cousins’ IE2600-25-GG Series feature a range of 2-1/2″ Groove by Groove factory set pressure reducing angle valves. These brass valves are intended to serve as floor control valves, standpipe valves, or a checking device. Listed by Underwriters’ Laboratories, the IE2600-25-GG series can handle FLOW and NO-FLOW conditions, as required by NFPA for CLASS I and III systems, up to maxiumum inlet pressures of 400 PSI. Tapped and plugged holes (1/4″) are standard on all bodies to allow for monitoring by external pressure gauges (sold seperately).

Download our Valve Selection Guide to find the recommended valve size for your application.

OPTIONS
Supervisory Switch (Add suffix -SS)
Chrome Plate Finish

CONNECTION OPTIONS
Female NPT x Male Hose; Angle (-FM)
Female NPT x Female NPT; Angle (-FF)
Female NPT x Female NPT; Inline (-ST)
Groove x Male Hose; Angle (-GM)
Groove x Groove; Inline (-SG)

LISTED

UL ULC

A:     12.25″     (311 mm)     [OPEN]
A:     11.94″     (296 mm)     [CLOSED]
B:      3.81″       (96 mm)
C:      4.31″      (109 mm)

IE2600-25-GG - DIMENSIONS

Wilson & Cousins’ IE2600-25-GG Series:

  • Pressure reducing angle (90-degree) valve
  • UL/ULC Listed
  • Cast brass construction
  • Maximum inlet pressure up to 400 psig (2757 kPa)
  • Maximum inlet flow rate up to 500 gpm
  • Eight (8) different bonnet sizes to choose from, each one offering different reduction properties