Product Details

INFORMATION
The Wilson and Cousins' IE2600-25-FF-SS Series feature a range of 2-1/2" Female NPT by Female NPT factory set pressure reducing angle valves. These brass valves are intended to serve as floor control valves, standpipe valves, or a checking device. Listed by Underwriters' Laboratories, the IE2600-25-FF-SS series can handle FLOW and NO-FLOW conditions, as required by NFPA for CLASS I and III systems, up to maxiumum inlet pressures of 400 PSI. Tapped and plugged holes (1/4") are standard on all bodies to allow for monitoring by external pressure gauges (sold seperately).

The inclusion of a Supervisory Switch allows for external monitoring of the valves Open/Closed position.

Download our Valve Selection Guide to find the recommended valve size for your application.

OPTIONS
Chrome Plate Finish

CONNECTION OPTIONS
Female NPT x Male Hose; Angle (-FM)
Female NPT x Female NPT; Inline (-ST)
Groove x Male Hose; Angle (-GM)
Groove x Groove; Angle (-GG)
Groove x Groove; Inline (-SG)

LISTED

Wilson & Cousins' IE2600-25-FF-SS Series:

• Pressure reducing angle (90-degree) valve
• UL/ULC Listed
• Cast brass construction
• Integral supervisory switch for remote monitoring of open or closed position
• Maximum inlet pressure up to 400 psig (2757 kPa)
• Maximum inlet flow rate up to 500 gpm
• Eight (8) different bonnet sizes to choose from, each one offering different reduction properties